Skip to content

Seagull #GPK




GNSS Receiver



Out of stock

SKU: SGPK-1001 Categories: , , , ,

Seagull #GPK is a high precision GNSS receiver which can operate in multiple modes in order to give you the utmost flexibility and precision for your UAV platform!

#GPK features an on-board SD card which gives the user ability to easily configure the module in order to suit the functionality required – on the go!

  • Multiple modes – Real Time Kinematic, Post Processed Kinematic, Moving Baseline
  • High refresh rate – 4Hz MB, 5Hz RTK, 10Hz RAW, 10Hz GNSS
  • High position accuracy – up to 1 cm!
  • Easy configuration – via SD card 
  • Two operational modes – BASE or ROVER
  • On-board PPK logging, #MAP-X2 compatible, Multiple Flight Controllers supported .

Weight .5 lbs





Seagull #GPK supports the following functions

  • BASE / ROVER ( #GPK can operate either as a BASE or ROVER )
  • RTK ( Real Time Kinematic navigation for your drone and logging – at 5Hz )
  • PPK ( Post Processed Kinematic BASE logging and ROVER logging+navigation with #MAP-X2 – at 10Hz )
  • MB ( Moving Baseline navigation and logging, requires 2 x #GPK modules – at 4Hz )
  • GNSS ( Non-Kinematic mode navigation and logging – at 10Hz )

Flight Controllers

The following hardware is supported

Flight Controllers:

  • Pixhawk 1
  • Pixhawk 2.1
  • Pixracer
  • APM 2.6
  • APM 2.5

– all of the ardupilot based FCs’ are supported as well any FC that is capable of utilizing UBX/NMEA messages for navigation


  • #RADIO
  • #MAP-X2

In the box

The following is part of this product

  • 1 x Seagull #GPK
  • 1 x GPS antenna for #GPK
  • 1 x 128MB micro SD card ( w.  fullsize adaptor )

 – all the support your could wish for !


Details for Seagull #GPK

  • Ublox NEO-M8P-2, L1/B1, GPS/GLONASS/BEIDOU GNSS receiver – update rate up to 10Hz
  • Voltage: 3.9 – 12V (5 volts recommended – do NOT exceed 12V!)
  • Current draw: 80mA MIN, 100mA AVERAGE, 120mA MAX
  • Dimensions: 45mm x 41mm x 11mm
  • Weight: 16 gram

User Manual


You may also like…