Seagull #GPK2

Seagull #GPK2

$610.00

  • Precise UAV Navigation and data logging!
  • Multiple modes – Real Time Kinematic, Post Processed Kinematic, Moving Baseline
  • High refresh rate – up to 10Hz MB, 20Hz RTK, 25Hz PPK, 25Hz PVT GNSS
  • High position accuracy – up to 1 cm!
  • 4 Concurrent GNSS constellations supported!
  • Two operational modes – BASE / ROVER
  • EVENT logging – such as shutter release
  • On-board logging of GNSS data!
seagle

Description

Seagull #GPK2 is a dual-band professional grade GNSS receiver which can be utilized in various applications where high precision positioning is required. Typical precision that can be achieved with #GPK2 in RTK mode is – 1 centimeter!

Receiver is capable of tracking and decoding the following satellite signals – GPS L1C/A – L2C, GLONASS L1OF – L2OF, GALILEO E1-B/C – E5b, BEIDOU B1I – B2I. #GPK2 modules can operate as ROVER or BASE – in Real Time Kinematic / Post Processed Kinematic / Moving Baseline modes.

The modules support internal data logging of RAW data for post processing and in LATITUDE/LONGITUDE/ALTITUDE formats. #GPK2 features an onboard EVENT PIN – which can be used to log precise co-ordinates based on camera shutter feedback or other.

Brand

Seagull

seagle

Additional information

Weight 0.1 lbs

SPECIFICATIONS

  • Ublox ZED-F9P GNSS receiver
  • Following signals supported: L1C/A – L2C, L1OF – L2OF, E1-B/C – E5b, B1I – B2I (GPS/GLONASS/GALILEO/BEIDOU)
  • Refresh rate: up to 10Hz Moving Baseline, 25Hz Real Time Kinematic, 25Hz RAW (Post Processed Kinematic), 25Hz PVT (UBX Binary)
  • Voltage: 3.9 – 12V (5 volts recommended – do NOT exceed 12V!)
  • Current draw: 140mA (*average)
  • Dimensions: 44.2mm x 46.6mm x 10mm
  • Weight: 20g

IN THE BOX

  • 1 x Seagull #GPK2
  • 1 x Dual Band Antenna for #GPK2 ( Default cable length: 5 meters )
  • 1 x 16GB micro SD card ( w.  fullsize adaptor )

COMPATIBILITY

Flight Controllers:

  • Pixhawk 1 *
  • Pixhawk 2.1
  • Pixracer
  • APM 2.6 *
  • APM 2.5 *

Seagull:

  • #RADIO
  • #MAP-X2
  • #SYNC2

– all of the Ardupilot / PX4 based FCs’ are supported, as well any FC that is capable of utilizing UBX/NMEA messages for navigation
*navigational rate might be limited on highlighted flight controllers*

 

Reviews

There are no reviews yet.

Be the first to review “Seagull #GPK2”

This site uses Akismet to reduce spam. Learn how your comment data is processed.